7 - Internal effect processor—Preset effects7–5Gated reverb20 Noise Gate A “heavy” gated reverb21 Short Gate Gated reverb with a short hold time22 Wild Gate A slightly unusual-sounding gate23 Long Gate A gated reverb with a longer hold24 Slow Attack Gated reverb with a slower attack25 Ambience Gate Suitable for an “ambient” feelDelayStereo26 Stereo Echo Basic setting with the repeat rate set at 120 bpm27 Enhance Comb Uses a comb filter for enhancementPing-Pong28Cross Feedback Echo feedback alternates between the left andright channels, (in mono, this is the same as theStereo Echo setting)29 Delay L<-->R One delay moving between left and rightMulti-tap3080bpm Rhythmic sound for pieces with a tempo of80 bpm. The ratio of delay time to feedback time(4:3) is particularly effective.31 120bpm As above, but for pieces with a tempo of 120 bpm32 150bpm As above, but for pieces with a tempo of 150 bpmChorus33 Ensemble A thick chorus sound, with a continuous feel34 Chorus Flange Feedback is added to the chorus algorithm, pro-ducing resonanceFlanger35 Sweet Flanger Soft flange effect36 Tremolo Flange Tremolo sound produced using flangerPhaser37 Mellow Phaser Sweet, “polished” phaser sound38 Wah Phaser Phaser using resonance to mimic a wah-wahpedalPitch Shifter39 Octaver Pitch shift by one octave, suitable for chords40 5th Harmony Pitch shift by an interval of a fifth. Suitable formonophonic signals41 Doubler Chorus sound produced by detuning. Fine controlalters the amount of effect.42 Glow up! Repeating ever-increasing pitch shift, dependingon feedbackExciter 43 Edge Helps to emphasize higher-frequency soundsEffect Type Number Title Comment
