Tascam TM-D4000 Owner's Manual

Also see for TM-D4000: Operation manual Technical documentation

Contents

14 - Specifications, etc.14–514.6.6 Dynamics libraryIn these messages, XX represents the libraryentry, and YY represents the channel(s) usingthe dynamics processor settings.14.6.7 EQ libraryIn these messages, XX represents the libraryentry, and YY represents the channel(s) usingthe EQ setting.14.6.8 Effect libraryIn these messages, XX represents the libraryentry.14.6.9 Stereo link (using SEL keys)14.6.10 Computer communications(automation)l DYN LibraryXX isRead Only!An attempt was made tostore to a read-onlydynamics library entryl Can't Recall DYNLibraryXX.An attempt was made torecall an empty dynamicslibrary entry4 OK to OverwriteDYN LibraryXXfrom YY?A request was made tostore an entry to a non-empty dynamics libraryentry4 Stored to DYNLibraryXX fromYY.Storing to the dynamicslibrary entry is complete4 DYN LibraryXXRecalled to YY.A dynamics library entryhas been successfullyrecalled4 Can't undoDynamics recallNo dynamics library entryhas yet been recalled forundoing4 YY DynamicsRecall UndoneThe recall operation hasbeen undone4 YY DynamicsRecall redoneThe undo operation hasitself been undonel EQ LibraryXX isRead Only!An attempt was made tostore to a read-only EQlibrary entryl Can't Recall EQLibraryXX.An attempt was made torecall an empty EQ libraryentry4 OK to OverwriteEQ LibraryXXfrom YY?A request was made tostore an entry to a non-empty EQ library entry4 Stored to EQLibraryXX fromYY.Storing to the EQ libraryentry is complete4 EQ LibraryXXRecalled to YY.An EQ library entry hasbeen successfully recalled4 Can't undo EQ-RecallNo EQ library entry has yetbeen recalled for undoing4 EQ Recall Undone The recall operation hasbeen undone4 EQ Recall redone The undo operation hasitself been undonel Effect LibraryXXis Read Only!An attempt was made tostore to a read-only effectlibrary entryl Can't RecallEffectLibraryXX.An attempt was made torecall an empty effectlibrary entry4 OK to OverwriteEffectLibraryXX?A request was made tostore an entry to a non-empty effect library entry4 Stored to EffectLibraryXX.Storing to the effect libraryentry is complete4 Effect LibraryXXRecalled.An effect library entry hasbeen successfully recalled4 Can't undoEffect-RecallNo effect library entry hasyet been recalled for undo-ing4 Effect RecallUndoneThe recall operation hasbeen undone4 Effect RecallredoneThe undo operation hasitself been undone4 ST LINK ON([1st channel]∏[2nd channel])The SEL keys have beenpressed to link two adja-cent channels4 ST LINK OFF([1st channel]-[2nd channel])The SEL keys have beenpressed to unlink two adja-cent channelsl Error>xx-x-xxxxxxxxInternal errors. It may bepossible to continueworking after these errorshave occurred, but we donot recommend it. Pleasemake a note of thenumbers that appear(represented by x) andcommunicate them toTASCAM service, togetherwith an account of theaccompanyingcircumstances, as far aspossible.l cmdError>xx-x-xxxxxxxxlCommunicationError>XX-XX-XXXXXXXXAn error (probably not seri-ous) has occurred in thecommunication betweenthe TM-D4000 and thehost computer. Checkcommunication speed set-tings, cable connections,etc. before trying commu-nication again.