14 - Specifications, etc.14–614.6.11 MIDI14.6.12 Fatal System ErrorsNOTEThese messages should not occur. However,if you do see such a message, please make anote of the number displayed, and contactTASCAM Service. Inform them of the errorand, if possible, a brief description of yoursystem and the events leading up to the error.No recovery is possible from these errors—you must turn down the level of the monitoringsystem, power down the TM-D4000 and waita few seconds before switching it on again.l Host TX CommandBuffer Overflow. Internal error — note thatsome of the data beingtransmitted to and from theTM-D4000 will have beenlost of one of thesemessages appears. Re-attempt the datatransmission.l Host TX BulkBuffer Overflow.l Host RX Bulkcommand BufferOverflow.l Host RX commandBuffer Overflow.4 MIDI activesensing has beendiscontinuedThis appears if ActiveSensing is turned on andthe Active Sensing mes-sages stop4 MIDI SystemReset Received,Reboot Mixer?Provides the option tohonor or ignore a receivedMIDI Reset message4 Please checkMIDI IN PortThe MIDI connection to theTM-D4000 may not be cor-rectly madelPlease Set CommsSpeed to MIDI inthe AutomationSetup screenfirstAn attempt is made to usethe MIDI Bulk Dump func-tion with a speed otherthan MIDI selected as thecommunications speed8 Fatal Error :XX-YYYYYYYY-ZZAn unrecoverable errorhas occurred. ContactTASCAM Service.l Out of range insram.type=Though these are not fatalmessages (the TM-D4000will attempt a recoveryfrom them), internal mem-ory may not be completelyas it was before the eventoccurred. Check the mem-ory contents beforecontinuing.l Out of range incurrentsram.tyoe =l UnexpectedEffector command0xXXXXXXXX