X ero x 4 5 95 C op i e r/P ri n te r U s er G ui d e1-1 41. P ro d uc t o v er v iewPowering offThe procedure for turning the power off is as follows:CAUTION: Switching off the power of the machine may causeloss of data being processed.1. Before turning the power off, make sure that all copy or printjobs have completely finished. Also, make sure that theOnline indicator is not lit.KEY POINT: Never turn the power off in the following instances:• While data is being received• While data is being sent (FTP/SMB/e-mail)• While jobs are being printed.• While jobs are being copied• While a scan is being executed• While data is being imported from computer2. Press the power switch to the position.KEY POINT: Power off processing is performed internally on themachine for a while after the power switch is turned off. Therefore,do not unplug the power cord from the power outlet immediatelyafter turning the power switch off.NOTE: If you turn the power back on after turning it off, first makesure that the display on the Touch Screen has gone out.About the circuit breakerThe machine is provided with a circuit breaker.In the event of a current leakage, the breaker will automatically cutoff the power circuit to prevent any leakage or fire from occurring.The circuit breaker is normally On (“l”) position as shown in thefigure above.If the breaker is Off (“O”) position, contact your Customer SupportCenter as there might be some unusual conditions.
