X ero x 4 5 95 C op i e r/P ri n te r U s er G ui d e12 -1 812 . Sp ec i fi c a ti o n sPCL EmulationPrinter Command Language (PCL) is a Page DescriptionLanguage (PDL) used by the printer for converting incominginformation to the results seen on the printed page.If you do not use the Integrated Controller PCL Driver and the PCLcommands are not embedded in the job file, for example an ASCIItext file, use the settings in PCL Emulation Mode to program thejob parameters. PCL Emulation Mode can be accessed fromCentreWare Internet Services so that you can set theprogramming to control printer features, for example, outputdestination, paper size, and print pitch.For information about the PCL commands recognized by theprinter, go to the PDL Reference Guide, which can be found onwww.xerox.com under Support & Drivers > printer number >Integrated Controller > User Documentation.HP-GL/2 EmulationHP-GL/2 or Hewlett-Packard Graphics Language 2 is a PageDescription Language (PDL) for representing vector graphics,which are composed of lines and geometrical shapes instead ofbitmaps.If your job does not have the HP-GL/2 settings embedded, HP-GL/2 logical printer settings can be set in CentreWare InternetServices > Properties tab > Emulation Settings. For information onusing CentreWare Internet Services, see the SystemAdministration Guide.Consult your HP-GL/2 programming guide for specific settings.Print processingmode408 When using the PDF direct print feature, selects the mode for printprocessing.[0] (default) : PDF Bridge[1] : PSPDF Bridge processes the PDF using the Fuji Xerox PDF direct printfeature.PS processes the PDF using the Adobe PostScript feature.This setting appears only when the optional PostScript3 kit is installed.The printed results may be different when [PDF Bridge] is selected orwhen [PS] is selected.When [PS] is selected, the setting in [Layout] is disabled.Setting item Itemnumber Setting values