X ero x 4 5 95 Co pi e r/P ri n te r U s e r G u i de 2-352. Co p y3. Select Save to save the changes. Auto Size DetectScan sizes are detected automatically.NOTE: If the document size cannot be detected, a screen to inputthe document size appears. Standard sizeSelect from the preset size buttons.You can change the indicated document sizes. For informationabout the setting procedure, refer to "Original Size Defaults" in theSystem Administration Guide. Non-Standard SizeUse the area at the right of the screen to enter the desired scansize when scanning non-standard size documents or whenmaking copies at a size different from that of the currently loadeddocument. The size can be specified in 0.1 inch or 1 mmincrements within the range from 0.6 to 17.0 inches (15 to 432mm) for the width (X) on the document glass and within the rangefrom 0.6 to 11.6 inches (15 to 297 mm) for the height (Y) on thedocument glass. The scale on the outside of the document glassis a useful reference for specifying the document size.Mixed Size OriginalsYou can simultaneously scan different sized documents. Outputcan be made to media the same size as the originals or so thatoutput is made on the same size of media no matter the size of theoriginal.KEY POINT: Be sure to load A5 documents in Long Edge Feedorientation.When loading a B5 size document with A3 or 8.5 x 11 in./A4 size documents in a vertical direction, place the B5document also in a vertical direction.The recommended combinations of documents are 8.5 x11 inch/A4 portrait and11 x 17 inch/A3 landscape or B5portrait and B4 landscape. If you combine documents withsizes other than the ones just stipulated, the documentsmay not feed correctly or scan properly.