X ero x 4 5 95 C op i e r/P ri n te r U s er G ui d e7-47. P a p er an d O t he r Me d iaLoad paper in the trays About types of paper loaded in traysThe machine automatically detects the size and orientation ofloaded paper in trays. The paper type, however, must be set.Normally, plain paper is set to each of the trays. Change the papertype settings if you load other paper types. Paper can also benamed and set as user-defined paper. Up to five paper types canbe set as user-defined paper.For details about changing paper type, refer to "Paper TrayAttributes" in the System Administration Guide. About automatic tray selectionAutomatic tray selection is active if Auto is selected for AutoPaper Select (Type). If the machine judges that there are two ormore corresponding trays in automatic tray selection, the machinegives higher priority to the tray having the highest Paper TypePriority set at Paper Tray Settings. During automatic trayselection, trays whose Paper Type Priority setting is set to Offare not targeted in Automatic Tray Selection. Also, if the PaperPriority setting is exactly the same, automatic tray selection isdetermined by Tray Priority.NOTE: Tray 5 (Bypass) cannot be selected in automatic trayselection.For information about setting Paper Type, Paper Type Priority,Paper Tray Priority, and setting the paper substitute feature, referto "Paper Tray Settings" in the System Administration Guide. Thesame settings can also be made from CentreWare InternetServices. See your System Administrator for help.Load paper in Trays 1 and 2When the machine runs out of paper during copying or printing, amessage is displayed on the Touch Screen display. Add paperaccording to the displayed instructions. Copying or printing isautomatically resumed when paper is added.1. Pull out the tray towards you until it stops.