X ero x 4 5 95 C op i e r/P ri n te r U s er G ui d e2 -5 62. C op yTransparency SeparatorsA blank sheet can be output and be inserted as a separatorbetween copied transparencies. At the same time, only therequired number of copies for distribution is printed. When loadingtransparencies in Tray 5 (Bypass Tray), make sure that the paperfor the separators (or for distribution) is loaded at the sameorientation as that of the transparencies.KEY POINT: Xerox recommends OHP film. Use of films notrecommended by Xerox may cause machine breakdown or paperjams.1. On the All Services screen, select Copy. Select the OutputFormat tab and then select Transparency Separators.2. Select any item.3. Select Save to keep your changes. No SeparatorsTransparency separators are not used. Blank SeparatorsA blank sheet of paper is inserted as a separator each time atransparency is copied. Only one set of copies can be made. Blank Separators + N SetsA blank sheet of paper is inserted as a separator each time atransparency is copied. At the same time, only the requirednumber of copies for distribution is printed.