X ero x 4 5 95 Co pi e r/P ri n te r U s e r G u i de 11-3511 . P ro b le m S o l vi n g016-713 Cause The password set to the mailbox and the inputtedpassword were not in agreement.Remedy Enter the correct password.016-714 Cause Specified mailbox did not exist.Remedy Create a mailbox or specify the existing mailbox.016-716 Cause Unable to spool TIFF file because of insufficient diskspace.Remedy Remove unnecessary documents and users stored onthe printer and then attach the hard disk. When attachinga hard disk, contact the Customer Support Center.Refer to “Delete Documents in the Scan & Other Jobs Mailbox” onpage 4-69.016-718 Cause PCL print data could not be processed as there wasinsufficient memory.Remedy Reduce resolution, cancel 2 Sided printing or N up, andtry to print again.016-719 Cause PCL print data could not be processed as there wasinsufficient memory.Remedy Increase the size of the print page buffer.016-720 Cause The PCL print data included a command which cannotbe processed.Remedy Confirm the print data and try to print again.016-721 Cause An error occurred during print processing. Probablecauses are as follows:1. Printing was instructed by Automatic TraySelection when Paper Type Priority is set toAutomatic Tray switching Off for all paper in theCommon Settings.2. ESC/P command errorRemedy For 1, when printing by Automatic Tray Selection, setone of the paper types to a setting other thanAutomatic Tray switching Off in Paper Type Priority.For 2, check print data.Refer to “Paper Type Priority” in the System Administration Guide.016-722 Cause Unsupported staple position is specified.Remedy Confirm the position, and specify the print data again.016-723 Cause Unsupported punch position is specified.Remedy Confirm the position, and specify the print data again.016-728 Cause An unsupported tag was included in the TIFF file.Remedy Check the print data.Refer to “Scan Options” on page 3-38.016-729 Cause Unable to print because the number of colors/resolutionof the TIFF file exceeds the allowed range.Remedy Change the number of colors/resolution for the TIFF file,and specify the print data again.Refer to “Scan Options” on page 3-38.Error CodeCategoryCause and RemedyC P S M O
