8-8 System GuideHints and TipsPerform a traceTo start the trace, perform the following:1. Login as Administrator.2. Select [System - Online Manager].3. Select:4. Channel Gateway - Enable5. Input Device - Online6. Input Control - Start7. Submit a job from the host.8. After the job is completely received by the Controller, selectInput Control - End.9. Open a Terminal window.10. Type cd /opt/XRXnps/XRXgrpset/bin and press .11. Type ./dspTrc > FileName.txt and press .12. Type ls -l and press to see the new file and the filesize.13. If the file size is greater than 1.44 MB, type compressFileName.txt and press . If the file size is less than1.44 MB, go to “Export the trace file to floppy”.Export the trace file to floppyTo export the trace file to a floppy, perform the following:1. Insert a blank, formatted floppy into the floppy drive.2. Type volrmmount -i and press .3. If you used the “compress” command above, type cpFileName.txt.Z /floppy/floppy0 and press . If you didnot use the “compress” command above, type cpFileName.txt /floppy/floppy0 and press .4. Type eject and press .Utility Change Description Focus/opt/XRXnps/bin/setascii decomposer Forced ASCII files throughdesignated decomposer (that is,ASCII through PCL). Implementedin queue manager in 2.1Black andwhite/opt/XRXnps/bin/setfifomode Enables FIFO job reception modein front end of system.Both
