6-1 0 System GuideAccounting and Billing• Sheets purged by the system for fault recovery or imagequality adjustment.Billing metersThe Xerox Billing Meter window tracks the time and date of thelast meter read and the following Print Billing Report options areretained between restarts:• Queue name for printing the Billing Report.• Customer ID (Customer Name)• Machine ID (serial number).The printing information is pre-loaded and only needs to beentered once in the system. The customer or servicerepresentative completes the entry and prints the Billing report.This stores the values. But if the values stored are in error in someway, they are editable.Table 6-1 Billing Meters for RegionsMarketRegion Billing Meters for RegionRegion 1 Meter A: Total impressions to an output destinationincluding Administration Pages.Meter B: Total impressions for each image of the jobup to and including the last sheet of the 10th set.Does not include Administration Pages.Region 2 Meter 1: Total impressions to an output destinationincluding Administration Pages.Meter 2: Total impressions printed on sheets widerthan 9”. Includes Administration Pages.Meter 3: Total impressions for sets 11-18. Beginscounting with the first image in set 11 and stops afterthe last image in set 18. Does not includeAdministration Pages.Meter 4: Total impressions in set 19 of everydocument printed. Does not include AdministrationPages.Region 5 Meter A: Total impressions to an output destinationincluding Administration Pages.
