1-6 System GuideGateway and Network ConfigurationSNMP gateway configurationSNMP displays the status of network devices. Using the SNMPtab in the Xerox FreeFlow Print Server Gateways, theadministrator can select among a number of features and settingsfor SNMP.NOTE: SNMP requires a standard license. The SystemAdministrator must enable SNMP in License Manager.Xerox recommends the following third–party SNMP softwaremanagers:• IBM Network Printer Manager (XP)• TNG Unicenter (XP)• HP OpenView (UNIX, XP)• Xerox CentreWare (UNIX, XP)NOTE: The SNMP manager (for example, HP OpenView) mayhave a number of requests into the Xerox FreeFlow Print Serverfor information. The requested information may not be among thesupported data sets on the Print Server. When this occurs, theSNMP client/manager displays “no value...etc".NOTE: You can have more than one SNMP manager running atthe same time.Additional features supported in SNMPSNMP support for the following features are product dependent:• The ability to ‘SET’ attributes.• The ability to localize text and units of measure.• The ability to support a number of MIBs related to finishing andprinting.• The ability to perform automatic meter reading.The following table specifies which Xerox products have theseSNMP supported features:Table 1-1 SNMP Supported Features by ProductFeatureDT 61XXand DP1xxEPS 1XX iGen Nuvera1xxAbility to SET Attributes Y Y N Y
