System Guide 1- 11Gateway and Network ConfigurationAlthough the default is set so that the SNMP locality and unit ofmeasure is the same as that of the LUI, the new feature allows theadministrator to select a different locality or unit of measure for theSNMP gateway.Remote SNMP clients can control the localization of text objectsof syntaxLocalizedDescriptionStringTC by setting the MIB object:prtGeneralCurrentLocalizationAccess is changed from Read-only to Read/Write.However, Remote SNMP clients cannot control the units ofmeasure localization of numeric MIB objects. The localization ofthese objects can only be controlled from the LUI.SNMP configuration variablesOf the many parameters that are available for SNMPconfiguration, only the ones of common interest to Xeroxcustomers are shown in the following table:Table 1-2 Configuration VariablesParameter Name Description ValueRange DefaultValueCommandLine Turn on/off the following flags:–l: logging to SNMP_DEBUG_LOG–w: logging to windowPrinter operator The name of the printer operator String(0...127)Printer administrator The name of the printer administrator String(0...127)Printer administratorlocationThe location of the office of the printeradministratorString(0...127)Printer administratorPhoneThe telephone number for contacting theprinter administratorString(0...127)Printer location The location of the printer String(0...127)
