6 Printing6-46 Xerox Phaser 3200MFPUsing Your Machine with a Macintosh (Phaser 3200MFP/N only)Your machine supports Macintosh systems with a built-in USB interface or a10/100 Base-TX network interface card. When you print a file from aMacintosh computer, you can use the PostScript driver by installing the PPDfile.Installing Software for MacintoshThe PostScript driver CD-ROM that came with your machine provides you with thePPD file to use the PS driver, Apple LaserWriter driver, for printing on a Macintoshcomputer.Also, it provides you with the TWAIN driver for scanning on a Macintoshcomputer.Verify the following before you install the printer software:Install the Printer driver1. Connect your machine to the computer using the USB cable or theEthernet cable.2. Turn on your computer and the machine.3. Insert the PostScript driver CD-ROM which came with your machine intothe CD-ROM drive.4. Double-click the Xerox MFP on your Macintosh desktop.5. Double-click the MAC_Installer folder.6. Double-click the MAC_Printer folder.7. Double-click the Xerox Phaser 3200MFP_OSX icon.8. Click Continue.9. Click Install.10. After the installation is finished, click Quit.Item RequirementsOperating System Mac OS 10.3 ~ 10.4RAM 128 MBFree Disk Space 200 MB
