5 CopyingXerox Phaser 3200MFP 5-3Making Copies on the Document Glass1. Lift and open the document cover.2. Place the document face downon the document glass and align itat the top left corner of the glass.NOTE:• Make sure that no documents arein the ADF (Automatic DocumentFeeder). If a document is detectedin the ADF, the machine gives itpriority over the document on thedocument glass.• Only letter, A4 sized print materialscan be placed in the DocumentGlass.3. Close the document cover.NOTE:• Lower the document cover gently to avoid damage to the machine orpersonal injury.• If you leave the cover open while copying you may affect copy quality andtoner consumption.• If you are copying a page from a book or magazine, leave the cover open.4. Press the Copy button to enter the copy mode.5. Select the copy settings including number of copies, copy size,brightness, and original type, by using the control panel buttons. SeeSelecting Copy Options on page 5-5.To clear the settings, use the Stop/Clear button.6. If necessary, you can use special copy features, such as Poster, Auto Fit,Clone, and ID Card copying. See Special Copy Features on page 5-77. Press Start to begin copying. The display shows the copy processing.
