8 FaxingXerox Phaser 3200MFP 8-7the next page on the glass. Press the scroll button ( or ) to display"Yes" and press Enter. Repeat as necessary.After all of the pages are scanned, press the scroll button ( or ) todisplay "No" and press Enter when the display shows "Another Page?".7. The number is dialed and then the machine begins sending the fax whenthe receiving fax machine is ready.NOTE: When you want to cancel a fax job, press Stop/Clear at any timewhile sending.Sending a Fax Manually1. Load the document(s) face up into the ADF, or place a single documentface down on the document glass.For details about loading a document, see Loading a Document onpage 8-4.2. Press the Fax button3. Adjust the document resolution to suit your fax needs, see Adjusting theDocument Resolution on page 8-5.If you need to change the brightness, see Lighten/Darken on page 8-2.4. Press Manual Dial. You hear a dial tone.5. Enter the receiving fax machine’s number using the number keypad.You can also press and hold the digit button of the speed dial number ifyou have assigned one. To store the speed dial number, see Storing aNumber for Speed Dialing on page 8.13.6. When you hear a high-pitched fax signal from the remote fax machine,press Start.NOTE: When you want to cancel a fax job, press Stop/Clear at any timewhile sending.Redialing the Last NumberTo redial the number you last called:Press Redial/Pause.When a document is loaded in the ADF (Automatic Document Feeder; see Tofax a document using the Automatic Document Feeder (ADF): on page 8-4),the machine automatically begins to send.For a document placed on the document glass, the display asks if you want toload another page. To add more documents, press the scroll button ( or )to display "Yes" and press Enter. To send the fax immediately, press the scrollbutton ( or ) to display "No" and press Enter.
