2 Getting StartedXerox Phaser 3200MFP 2-15Changing the Display Language and CountrySetting LanguageTo change the language that displays on the control panel, follow these steps:1. Press Menu until “Machine Setup” appears on the top line of the display.2. Press the scroll button ( or ) until “Language” appears on the bottomline of the display.3. Press Enter. The current setting appears on the bottom line of thedisplay.4. Press the scroll button ( or ) until the language you want appears onthe display.5. Press Enter to save the selection.6. To return to Standby mode, press Stop/Clear.Setting the Machine IDIn some countries, you are required by law to indicate your fax number on anyfax you send. The Machine ID, containing your telephone number and name(or company name), will be printed at the top of each page sent from yourmachine.1. Press Menu until “Machine Setup” appears on the top line of the display.The first available menu item, “Machine ID”, displays on the bottom line.2. Press Enter. The display asks you to enter the fax number.3. If there is a number already set, the number appears.4. Enter your fax number using the number keypad.NOTE: If you make a mistake while entering numbers, press the button todelete the last digit.5. Press Enter when the number on the display is correct. The display asksyou to enter an ID.6. Enter your name or the company name using the number keypad.7. You can enter alphanumeric characters using the number keypad, andinclude special symbols by pressing the 0 button.8. For details on how to use the number keypad to enter alphanumericcharacters, see Entering Characters Using the Number Keypad – page2-16.9. If you want to enter the same letter or number in succession (e.g. SS,AA, 777), enter one digit, move the cursor by pressing the button andenter the next digit.
