5 Copying5-6 Xerox Phaser 3200MFPReduce/EnlargeUsing the Reduce/Enlarge button will reduce or enlarge the size of a copiedimage from 25% to 400% when you copying from the document glass or from25% to 100% from the ADF.To select from the predefined copy sizes:1. Press Reduce/Enlarge.The default setting appears on the bottom line of the display.2. Press Reduce/Enlarge or the scroll buttons ( or ) to find the sizesetting you want.3. Press Enter to save the selection.To fine-tune the size of copies:1. Press Reduce/Enlarge.2. Press Reduce/Enlarge or the scroll buttons ( or )until “Custom:25-100%” or “Custom:25-400%” displays on the bottomline. Press Enter.3. Press the scroll button ( or ) until the copy size you want appears onthe display.Pressing and holding the button allows you to quickly scroll to the numberyou want.You can also enter the value using the number keypad.4. Press Enter to save the selection.NOTE: When you make a reduced copy, black lines may appear at thebottom of your copy.Copy QuantityYou can select the number of copies from 1 to 99.1. Press Menu on the control panel until “Copy Setup” appears on the topline of the display.The first menu item, “Default-Change”, appears on the bottom line.2. Press Enter.3. Press the scroll button ( or ) to access the menu item, "CopyQuantity". It appears on the bottom line, then press Enter.4. Press the number you want to enter on the display:You can press and hold the button to quickly scroll the number you wantto enter.You can also enter the value using the number keypad.5. Press Enter to save the selection.
