Xerox Phaser 3200MFP User Manual

Also see for 3200MFPB - Phaser B/W Laser: Evaluator guide

Contents

Xerox Phaser 3200MFP User Manual Manual pdf 183 page image

9 MaintenanceXerox Phaser 3200MFP 9-72. Pull the print cartridge out andremove it from the printer.3. Thoroughly shake the printcartridge from side to side five orsix times to redistribute the toner.NOTE: If toner gets on yourclothing, wipe it off with a dry clothand wash clothing in cold water. Hotwater sets toner into fabric.CAUTION: Do not touch the greenunderside of the print cartridge.Use the handle on the cartridge to avoid touching this area.4. Reinstall the cartridge and close the front door. Make sure that the coveris securely closed. If it is not firmly closed, printing error may occur.Replacing the Print CartridgeWhen the display on the control panel shows the warning message, “TonerEmpty” the print cartridge has run and the machine stops printing. At thisstage, the print cartridges needs to be replaced.Remove the old print cartridge and install a new print cartridge. See Installingthe Print Cartridge on page 2-4.