10 TroubleshootingXerox Phaser 3200MFP 10-9Clearing LCD Error MessagesDisplay Meaning Suggested SolutionsCancel?1:Yes 2:NoYour machine’s memoryhas become full whiletrying to store adocument into memory.To cancel the fax job, press the1 button to accept “Yes”.If you want to send the pagesthat have been successfullystored, press the 2 button toaccept “No”. You should sendthe remaining pages later, whenmemory is available.Comm. Error The machine has acommunicationproblem.Ask the sender to try again.CRU Fuse Error The print cartridge isnot installed correctly.Install the print cartridgecorrectly. See Installing thePrint Cartridge on page 2-4.Document JamRemove&ReloadThe loaded documenthas jammed in the ADF(Automatic DocumentFeeder).Clear the document jam. SeeClearing Document Jams onpage 10-2.Front or RearCover OpenThe front door or rearcover is not securelylatched.Close the door until it locks intoplace.Enter Again You entered anunavailable item.Enter the correct item again.Low Heat Error There is a problem inthe fuser unit.Turn power off and wait 10seconds. Turn power on. If theproblem persists, call forservice.Open Heat ErrorOver HeatGroup NotAvailableYou have tried to selecta group locationnumber where only asingle location numbercan be used, such aswhen adding locationsfor a broadcastoperation.Use a speed dial number or diala number manually using thenumber keypad.
