10 Troubleshooting10-26 Xerox Phaser 3200MFPCommon PostScript Problems (Phaser 3200MFP/N Only)The following situations are PS language specific and may occur when severalprinter languages are being used.NOTE: To receive a printed or screen-displayed message when PostScripterrors occur, open the Print Options window and click the desired selectionnext to the PostScript errors sectionCondition Suggested solutionsPostScript file cannotbe printed.The PostScript driver maynot be installed correctly.• Install the PostScriptdriver.• Print a configuration pageand verify that the PSversion is available forprinting.• If the problem persists,contact a servicerepresentative.“Limit Check Error”message appears.The print job was toocomplex.You might need to reducethe complexity of the pageor install more memory.A PostScript error pageprints.The print job may not bePostScript.Make sure that the print jobis a PostScript job. Checkto see whether the softwareapplication expected asetup or PostScript headerfile to be sent to themachine.When print a documentin Macintosh withAcrobat Reader 6.0 orhigher, colors printincorrectly.The resolution setting in theprinter driver may not bematched with that inAcrobat Reader.Make sure that theresolution setting in yourprinter driver matches thatin Acrobat Reader.
