7 ScanningXerox Phaser 3200MFP 7-5Scanning using a network connection(Phaser 3200MFP/N only)If you have connected your machine to a network and set up networkparameters correctly, you can scan and send images over the network.Preparing for network scanningBefore using your machine’s network scanning features, you need to add themachine to the Network Scan program for scanning to a network client.Adding the machine to the Network Scan programFirst, install the Network Scan program. See Installing Printer Software inWindows on page 6-2.To scan images from your machine to your computer through the network, youneed to register the machine as an authorized network scanner in theNetwork Scan program.1. In Windows, select Start Programs Xerox Network ScanNetwork Scan.The Xerox Network Scan Manager window opens.2. Click the Add Device button or double-click the Add Device icon.3. Click Next.4. Select Browse for a scanner. (recommended), or select Connect tothis scanner. and enter the IP address of your machine.5. Click Next.A list of the scanners on your network appears.6. Select your machine from the list and enter a name, user ID, and PIN(Personal Identification Number) for the machine.NOTE: For the scanner name, the model name of your machine isautomatically entered, but can be changed.You can enter an ID of up to 8 characters. The first character must be a letter.The PIN must be 4 digits.7. Click Next.8. Click Finish.Your machine is added to the Network Scan program and you can nowscan images through the network.
