8 Faxing8-12 Xerox Phaser 3200MFP6. When your machine begins to ring, do not answer the call. The machinerequires several rings to learn the pattern.When the machine completes learning, the LCD displays “End DRPDSetup”.If the DRPD setup fails, “DRPD Ring Error” appears. Press Enter when“DRPD Mode” displays and retry from step 3.7. To return to Standby mode, press Stop/Clear.When the DRPD feature is set up, the DRPD option is available in the ReceiveMode menu. To receive faxes in the DRPD mode, you need to set the menuto DRPD; see DRPD Mode on page 8-3.NOTE: DRPD must be set up again if you re-assign your fax number, orconnect the machine to another telephone line.After DRPD has been set up, call your fax number again to verify that themachine answers with a fax tone. Then have a call placed to a differentnumber assigned to that same line to be sure the call is forwarded to theextension telephone or answering machine plugged into the EXT. jack.Receiving Faxes in the MemorySince your machine is a multi-tasking device, it can receive faxes while youare making copies or printing. If you receive a fax while you are copying orprinting, your machine stores incoming faxes in memory. Then, as soon asyou finish copying or printing, the machine automatically prints the fax.
