Fax WorkCentre ® XXXXUser Guide 17510. Select the Resolution option required.• Standard (200x100 dpi) requires the minimum communication time but does notproduce the best image quality for graphics and photos. This is the recommendedresolution for text documents.• Fine (200 dpi) produces average quality text and low quality photos and graphics. Thisresolution is recommended for average quality text documents and line art.11. Press the Start button on the control panel to scan the original.12. Remove the original from the document feeder or document glass when scanning hascompleted.13. Press the Job Status button on the device control panel to view the job list and check the statusof the job.More InformationUsing a User ID to Log In at the DeviceExplaining the Fax OptionsUsing Internet Services to find System Administrator Contact DetailsSystem Administrator Guide www.xerox.com/support.Image QualityChoosing the Image Options for Server FaxesServer Fax scans your documents and sends them to any type of fax machine that is connected toa telephone network. Your images are sent from your device to a third party fax server, which relaysthem over the telephone network to the fax number of your choice.Note: This option must be made available by your System Administrator.If Authentication or Accounting has been enabled on your device you may have to enter logindetails to access the Server Fax features.Use the Lighten / Darken options to manually adjust the lightness or darkness of the image. Lightoriginals containing pencil images may produce better output if the darkness is increased. Darkoriginals such as halftones or documents with colored backgrounds may need to be lightened.1. Load your documents face up in the document feeder input tray. Adjust the guide to just touchthe documents.OrLift up the document feeder. Place the document face down onto the document glass andregister it to the arrow at the top left corner. Close the document feeder.2. Press the Clear All button on the control panel to cancel any previous programming selections.3. Press the Services Home button.4. Select the Server Fax button.5. If required, select the Server Fax tab. This is usually the active tab when the Server Fax serviceopens.6. Select the Enter Fax Number entry box and use the numeric keypad, or the touch screenkeypad to enter the recipient’s fax number.7. Select the Add button.
