Getting Started WorkCentre ® XXXX72 User GuideTo enhance productivity your System Administrator can change the default settings for many of thefeatures to the settings most commonly used in your work group. For example, your SystemAdministrator could increase the default darkness of copies if you regularly copy lightly markeddocuments such as pencil drawings.Refer to the System Administrator Guide for further information.More InformationViewing the Progress and Details of a Job using the Job Status MenuUsing Internet Services to find System Administrator Contact DetailsSystem Administrator Guide www.xerox.com/support.Maintenance and ConsumablesIdentifying the Replaceable UnitsThere are several consumables on the device that need replenishing or replacing, such as paper,staples, and customer replaceable units.1. Toner Cartridge2. Print CartridgeThe device will display a message on the touch screen when any of the units need to be re-ordered.This message is a warning that the unit is nearing the end of its life. Only replace the unit when amessage actually instructs you to do so.WARNING: When replacing consumables do NOT remove the covers or guards that are fas-tened with screws. You cannot maintain or service any of the parts that are behind these cov-ers and guards. Do NOT attempt any maintenance procedure that is NOT specificallydescribed in the documentation supplied with your device.
