Print WorkCentre ® XXXX506 User Guide13. Select the 2-Sided Scanning option required.• 1-Sided use this option if your originals are printed on 1 side.• 2-Sided use this option if your originals are 2-sided. The document feeder must be used toscan your originals with this option.• 2-Sided, Rotate Side 2 use this option if your originals are 2-sided and open up like acalendar. The document feeder must be used to scan your originals with this option.14. Select the Finishing button to select a specific finishing option for the output, or select Autofor the device to choose an appropriate option.15. Press the Start button on the Control Panel to print the job.16. Press the Job Status button on the device control panel to view the job list and check the statusof the job.More InformationUsing the Scan to Mailbox Templates in Workflow ScanningCreating a Mailbox using Internet ServicesUsing a User ID to Log In at the DeviceSystem Administrator Guide www.xerox.com/support.Using Internet Services to find System Administrator Contact DetailsPrinting From USB using the Print From FeatureThe Print From feature prints jobs which have been saved on the device or on a USB stick. This is auseful feature if you have documents that you need to print regularly.Note: This option must be made available by your System Administrator.If Authentication or Accounting has been enabled on your device you may have to enter logindetails to access the Print From feature.Use the Print From... USB feature to print PDF, TIFF, JPEG and other print ready files from your USBFlash Drive.A print-ready document is a file that has been formatted and saved for printing from the sourceprogram, such as Microsoft Word. To create a print-ready file, select the Print to File option whenyou print your documents from programs such as Microsoft Word. From advanced publishingprograms there may be several methods to create print-ready files.1. Press the Clear All button on the control panel to cancel any previous programming selections.2. Press the Services Home button.3. Insert your USB Flash Drive into the USB port located to the left of the touch screen.It may take a few seconds for the USB Drive Detected screen to open.4. Select the Print from USB button.5. Select the saved job required.6. Select any options required.7. Select the Paper Supply button.8. Select the Paper Supply option required.• Automatically Select lets the device select the appropriate paper size for each originalbased on the size of the original and reduce or enlarge programming.• Select a paper tray that contains the size and type of paper you require. The size and medialoaded in each tray is displayed.
