Scan WorkCentre ® XXXXUser Guide 295• 400 dpi produces average image quality for photos and graphics and is recommended forphotos and graphics.• 600 dpi produces the largest image file size, but delivers the best image quality. Thissetting is recommended for high quality photos and graphics.11. Select the Image Color option required.• Auto Detect allows the device to select the most appropriate color setting.• Black and White produces black and white output even if the originals were color.• Grayscale produces output using various shades of gray.• Color produces full color output.12. Click the Scan button to save your settings and scan the image.13. Press the Job Status button on the device control panel to view the job list and check the statusof the job.14. Open the Xerox TWAIN Driver folder (or other destination folder you have selected) to retrieveyour scanned document.More InformationSystem Administrator Guide www.xerox.com/support.Using Internet Services to find System Administrator Contact DetailsAccessing the TWAIN Scan Driver Help PagesThe Xerox TWAIN scan driver scans images directly to your computer. The TWAIN driver can beused by many popular software applications to import scanned images. The scan driver allows youto use the specific features available on your device.Your System Administrator can configure access to the remote scanning feature. If scanning to yourapplication is not available or does not work, ask your System Administrator to enable the remotescanning feature and install the Xerox TWAIN scan driver.Refer to the System Administrator Guide for further information.1. Load your documents face up in the document feeder input tray. Adjust the guide to just touchthe documents.OrLift up the document feeder. Place the document face down onto the document glass andregister it to the arrow at the top left corner. Close the document feeder.2. Press the Clear All button on the control panel to cancel any previous programming selections.3. Using your computer, open the application you wish to scan the image to.4. Begin the import process. From most applications select File, then select Import.5. If required, follow any instructions within your application until you are given the opportunityto choose a scan driver or scanner.6. If required, select the device required from the list of scanners available.7. If required, select the Xerox TWAIN driver from the list of drivers available.8. Click the ? button. You will be directed to the Xerox online help in your default internet browser.More InformationSystem Administrator Guide www.xerox.com/support.Using Internet Services to find System Administrator Contact Details
