Getting Started WorkCentre ® XXXXUser Guide 37Power On and OffPowering the Device On1. Ensure that your device is connected to a suitable power supply and that the power cord is fullyplugged in to the electrical outlet of the device.2. Press the Power button. The entire powering on process (to power on all installed options) takesless than 3 minutes 50 seconds.Note: If there are any pages in the document feeder input tray when the device powers on orexits power save mode you will be prompted to reload the documents.Powering the Device OffPower Off ends the current session and turns off the device.1. Press the Power button on the control panel.2. Select the Power Off button on the touch screen.3. Select the Power Off button again to confirm that the device should power off.Note: Confirming power off will result in the deletion of any jobs currently in the queue. IfCancel is selected the power off option will be cancelled, the device will be available for use andany jobs currently in the queue will be retained.The device will begin a controlled power down sequence. It remains on for approximately 36seconds before switching off.
