E-Mail WorkCentre ® XXXXUser Guide 519Using E-mail to send 2-Sided OriginalsUse the E-mail feature to scan images and send them to a recipient as an attachment to an e-mail.Note: This option must be made available by your System Administrator.If Authentication or Accounting has been enabled on your device you may have to enter logindetails to access the E-mail features.Use the 2-Sided Scanning options to scan both sides of your document. The second side can berotated.1. Load your documents face up in the document feeder input tray. Adjust the guide to just touchthe documents.OrLift up the document feeder. Place the document face down onto the document glass andregister it to the arrow at the top left corner. Close the document feeder.Note: If you want to use the document glass instead of the document feeder you will need touse the Build Job option to save all the sides as part of the same job, otherwise each side willbe treated as a different document.2. Press the Clear All button on the control panel to cancel any previous programming selections.3. Press the Services Home button.4. Select the E-mail button on the touch screen.5. If required, select the E-mail tab. This is usually the active tab when the E-mail service opens.6. Select the New Recipient... button.7. Use the touch screen keyboard to enter the e-mail address of the recipient.• The number of alphanumeric characters that can be entered depends on the size of thecharacters chosen. Once the end of the entry box has been reached no more characterscan be added.• To delete a character use the backspace X button.• Use the special characters button to access special characters such as $ and %.• Buttons with an icon in the lower right corner have accented or additional charactersavailable. Select and hold the button to view related characters in a pop-up menu. Selectthe desired character from the pop-up menu.8. Select the Add button.• If you want to send the document to more than one recipient enter the additional details,one recipient at a time, and select the Add button again until all the recipients have beenadded.9. If required, select Cc from the To: dropdown menu to copy a recipient on the e-mail. Use thetouch screen keyboard to enter the recipient details and then select the Add button.Note: At least one To address must be selected, documents cannot be sent to a Cc addressalone.10. Select the Close button to save the information you entered.11. If required, select the From... button and use the touch screen keyboard to enter or edit theFrom address for the e-mail.Note: Your System Administrator may choose to lock the From button to prevent the presetFrom address being altered.• Select the OK button.
