Getting Started WorkCentre ® XXXX64 User Guide16. Remove the original from the document feeder or document glass when scanning hascompleted. The job enters the job list ready for processing.17. Press the Job Status button on the device control panel to view the job list and check the statusof the job.More InformationUsing a User ID to Log In at the DeviceUsing Internet Services to find System Administrator Contact DetailsSystem Administrator Guide www.xerox.com/support.Saved JobsSaving JobsSaving Jobs using the PostScript Print DriverYou can print to the device from your computer through a print driver. There are a variety of Xeroxprint drivers available for the device to support all the popular operating systems. The Xerox printdrivers allow you to use the specific features available on your device.If Authentication has been enabled on your device you may have to login at the device to see orrelease your jobs.If Accounting has been enabled you may have to enter login details at the print driver before youcan send your job.Use the Saved Job option to store your job on the device's hard drive so that it can then be printedon demand when required or printed from Internet Services.Note: Your System Administrator must enable the Job Storage feature on your print driver beforeyou can use the Saved Job option. If you are able to update your own driver settings, this featurecan be found by opening the drivers window, right clicking the driver, selecting Printer Propertiesand then the Configuration tab. Use the dropdown menu to set the Job Storage Module status inthe Installable Options section to Installed.Refer to the System Administrator Guide for further information.1. Open the document to be printed. From most applications select the Office button or selectFile, then select Print from the file menu.2. Enter the number of copies you want to produce. Depending on the application you are usingyou may also be able to select a page range and make other print selections.3. Select the Xerox PS driver from the list of print drivers available.4. Open the print driver Properties window - the method will vary depending on the applicationyou are printing from. From most Microsoft applications select the Properties or Preferencesbutton to open the window.5. If required, click the Printing Options tab. This is usually the active tab when the print driveropens.6. Select Saved Job from the Job Type dropdown menu.7. Select the Job Name entry box and use your keyboard to enter a name for your job.
