Fax WorkCentre ® XXXX182 User Guide9. Select the Layout Adjustment tab.10. Select the Original Size button.11. Select the Original Size option required.• Auto Detect enables automatic size sensing, this is the default setting. The size detectedis matched to a standard paper size.• Preset Scan Area defines the size of your original from a list of preset, standard originalsizes. You can view the list by using the scroll bar.• Custom Scan Area sets a specific area for scanning and is useful for scanning receipts.Measure the width (X) and height (Y) of the original to be scanned and enter the X and Ymeasurements into the fields provided.• Mixed Size Originals scans documents containing different sized pages. The pages mustbe the same width, such as A4 (8.5 x 11”) LEF and A3 (11 x 17”) SEF, other combinationsare shown on the device touchscreen. The device detects the size of the documents andwill produce different output depending on the combinations selected.12. Select the OK button.13. Press the Start button on the control panel to scan the original.14. Remove the original from the document feeder or document glass when scanning hascompleted.15. Press the Job Status button on the device control panel to view the job list and check the statusof the job.More InformationSetting the Original Orientation for Server FaxesUsing a User ID to Log In at the DeviceExplaining the Fax OptionsUsing Internet Services to find System Administrator Contact DetailsSystem Administrator Guide www.xerox.com/support.Using a Timer to Send a Server FaxServer Fax scans your documents and sends them to any type of fax machine that is connected toa telephone network. Your images are sent from your device to a third party fax server, which relaysthem over the telephone network to the fax number of your choice.Note: This option must be made available by your System Administrator.If Authentication or Accounting has been enabled on your device you may have to enter logindetails to access the Server Fax features.Use the Delay Send option to store a fax in the device memory and have the device send it at a timeyou specify. Jobs can be sent from 15 minutes to 24 hours after the time they are programmed. Thisfeature is useful if you want to send your fax to take advantage of off-peak phone rates, or if youare sending to a different time zone.
