Yaesu FT DX 3000 Operating Manual

Also see for FT DX 3000: Operating manual Operating manual Operating manual Operating manual Operating manual

Contents

Page 120FT DX 3000 O PERA T I N G M A N U A L088 TONE FREQFunction: Select the desired CTCSS Tone. A total of 50standard CTCSS tones are provided (see the CTCSSTone Chart on Page 91).Available Values: 67.0 ~ 254.1 HzDefault Setting: 67.0 HzMODE-RTTY Group089 RTTY LCUT FREQFunction: Selects the cutoff frequency of the lower sideof the RX audio filter in the RTTY mode.Available Values: OFF/100 ~ 1000 Hz (50 Hz/step)Default Setting: 300090 RTTY LCUT SLOPEFunction: Selects the filter slope of the lower side of theRX audio filter in the RTTY mode.Available Values: 6dB/oct / 18dB/octDefault Setting: 18dB/oct091 RTTY HCUT FREQFunction: Selects the cutoff frequency of the upper sideof the RX audio filter in the RTTY mode.Available Values: OFF/700 ~ 4000 Hz (50 Hz/step)Default Setting: 3000092 RTTY HCUT SLOPEFunction: Selects the filter slope of the upper side of theRX audio filter in the RTTY mode.Available Values: 6dB/oct / 18dB/octDefault Setting: 18dB/oct093 RTTY SHIFT PORTFunction: Selects the Shift Port to be used.Available Values: REAR / USBDefault Setting: REAR094 POLARITY-RFunction: Selects normal or reverse Mark/Space polarityfor RTTY receive operation.Available Values: NOR/REVDefault Setting: NOR095 POLARITY-TFunction: Selects normal or reverse Mark/Space polarityfor RTTY transmit operation.Available Values: NOR/REVDefault Setting: NOR096 RTTY OUT LEVELFunction: Sets the RTTY (AFSK) data output level atthe output port (pin 5) of the RTTY/PKT jack.Available Values: 0 ~ 100Default Setting: 50097 RTTY SHIFTFunction: Selects the frequency shift for RTTY (AFSK)operation.Available Values:170/200/425/850 HzDefault Setting: 170 Hz098 RTTY MARK FREQFunction: Selects the Mark tone for RTTY operation.Available Values: 1275/2125 HzDefault Setting: 2125 HzMODE-SSB Group099 SSB LCUT FREQFunction: Selects the cutoff frequency of the lower sideof the RX audio filter in the SSB mode.Available Values: OFF/100 ~ 1000 Hz (50 Hz/step)Default Setting: 200100 SSB LCUT SLOPEFunction: Selects the filter slope of the lower side of theRX audio filter in the SSB mode.Available Values: 6dB/oct / 18dB/octDefault Setting: 6dB/oct101 SSB HCUT FREQFunction: Selects the cutoff frequency of the upper sideof the RX audio filter in the SSB mode.Available Values: OFF/700 ~ 4000 Hz (50 Hz/step)Default Setting: 2800102 SSB HCUT SLOPEFunction: Selects the filter slope of the upper side of theRX audio filter in the RTTY mode.Available Values: 6dB/oct / 18dB/octDefault Setting: 6dB/oct103 SSB MIC SELFunction: Selects the microphone to be used on the SSBmode.Available Values: FRONT / DATA / USBDefault Setting: FRONTFRONT: Selects the microphone connected to the frontpanel MIC jack while using the SSB mode.DATA: Selects the microphone connected to pin 1 ofthe PACKET Jack while using the SSB mode.USB: Selects the microphone connected to the USBJack while using the SSB mode.104 SSB TX BPFFunction: Selects the audio passband of the DSPmodulator on the SSB mode.Available Values: 100-3000/100-2900/200-2800/300-2700/400-2600/3000WBDefault Setting: 300 ~ 2700 (Hz)M enu M ode