Yaesu FT DX 3000 Operating Manual

Also see for FT DX 3000: Operating manual Operating manual Operating manual Operating manual Operating manual

Contents

Page 129FT DX 3000 O peraTing M anualvoice MeMoRy Unit (dvs-6)insTallaTiOn OF O pTiOnal accessOriesFigure 1Figure 2Connector (5-pin)Connector (5-pin)Connector (6-pin)Connector (6-pin)1. Turn the FT DX 3000’s [POWER] switch “OFF”, andturn off the external DC power supply.2. Disconnect all the cables from the FT DX 3000.3. Referring to Figure 1, remove the 18 screwsattaching the bottom case, then remove the bottomcase.4. Refer to Figure 2 for the mounting location for theDVS-6.5. Push the DVS-6 onto the pins corresponding toits assigned mounting location on the transceiver.Gently press the board down until it is firmly seatedin its connectors.6. Replace the bottom case and its 18 screws.7. Connect the antenna and DC power supply to theFTDX 3000.