Yaesu FT DX 3000 Operating Manual

Also see for FT DX 3000: Operating manual Operating manual Operating manual Operating manual Operating manual

Contents

Page 73FT DX 3000 O peraTing M anualTranSMiTTer cOnvenience FeaTureSmOniTOr (ssb/Am/Fm mOdes)You may listen to the quality of your transmitted signal using the Monitor feature.1. Press the [MONI] button. The LED inside the [MONI]button glows orange.2. During transmission, rotate the [MONI] knob toadjust the audio level in the Headphones or speaker.Clockwise rotation of this knob will increase the vol-ume level.3. To switch the Monitor off again, press the [MONI]button once more. Confirming that the Monitor isnow disengaged.A dvice : Because the Monitor feature samples the transmit-ter IF signal, it can be very useful for checking theadjustment of the Speech Processor or ParametricEqualizer on SSB, and for checking the general sig-nal quality on AM and FM.A dvice : To adjust the Monitor level:1) Activate the MONI circuitry, if necessary.2) Press and hold in the [MONI] button for one sec-ond to enter Menu item “035 MONITOR LEVEL”.3) Press the [SELECT] button.4) While speaking into the microphone, rotate the[CLAR/VFO-B] knob (or press the p/q button)to adjust the monitor level.5) When you are satisfied with the setting, pressthe [SELECT] button, then press the [MENU]button to save the new setting and exit to normaloperation.[MONI] Button