Yaesu FT DX 3000 Operating Manual

Also see for FT DX 3000: Operating manual Operating manual Operating manual Operating manual Operating manual

Contents

Page 59FT DX 3000 O peraTing M anualA udio pitcH coNtRol (SSb Mode)The FTDX 3000 permits adjustment of the receiver audio response by shifting the carrier point during SSB operation.1. Press the [MENU] button to enter the Menu mode.2. Rotate the [CLAR/VFO-B] knob (or press the p/q button) to select Menu item “105 LSB RX CAR-RIER” or “106 SSB USB RX CARRIER”.3. Press the [SELECT] button.4. Rotate the [CLAR/VFO-B] knob (or press the p/q button) to adjust the receiver audio response asdesired.5. Press the [SELECT] button, then press the [MENU]button to save the new setting and exit to normal op-eration.M ute FeAtuReThere may be occasions when you want to silence the receiver audio of the FTDX 3000, perhaps to concentrate on an-other receiver or telephone call. The Mute feature makes this simple to accomplish.VFO-A/Memory MutePress the [(VFO-A)RX] Indicator/Switch, while receiv-ing the VFO-A frequency or Memory channel. TheFT DX 3000 will be silenced and the green LED in the[(VFO-A)RX] Indicator/Switch will blink.To restore reception, just press the blinking [(VFO-A)RX] Indicator/Switch once more.VFO-B MuteWhile receiving the VFO-B frequency, press the [(VFO-B)RX] Indicator/Switch. The FT DX 3000 will be si-lenced and the green LED in the [(VFO-B)RX] Indica-tor/Switch will blink.To restore reception, just press the blinking [(VFO-B)RX] Indicator/Switch once more.A dvice :If you press the [POWER] switch momentarily whilethe transceiver is turned on, the transceiver’s audio willbe muted for three seconds.[CLAR/VFO-B] Knob[MENU] Button[SELECT] KnobTOOls FOr cOMFOrTaBle anD eFFecTive recepTiOn[VFO-A(RX)] Button [VFO-B(RX)] Button