100Convenient FunctionsAF-DUAL Receive Function (Receiving Signals on OtherFrequency Channels While Listening to Broadcast Radio)The AF-DUAL Receive Function allows reception of a radio broadcast during standbyreception of A-band or B-band frequency (or frequency registered to a memorychannel). When standby reception is active, no audio is heard on the standby frequency,however if a voice signal is detected, the reception of the broadcast radio will bepaused, and the receiver frequency will be heard.Dual Receive ( see page 96) is a similar function. When using the Dual Receivefunction, every time the transceiver checks for a signal on the specified memorychannel during radio reception, the radio reception is interrupted (approximately every 5seconds). When using the AF-DUAL Receive Function, the radio reception is interruptedonly when there is a calling signal from another transceiver.Listening to a Radio Broadcast Using the AF-DUAL ReceiveFunction1 Set the A-band or B-band frequency (or Memory Channel/Home Channel) forstandby receive during broadcast radio reception.Tips • You can listen to the radio while scanning the standby receive signal frequencies.• You can listen to the radio while monitoring the standby receive signal frequency in dualreceive mode.2 Press the key to set the A-band to theoperating band.3 Touch [F MW].The function screen appears.4 Touch [A.DUAL].The AF-DUAL function is activated.