57Using the MemoryA Wide Variety of Memory FunctionsRecalling a Memory ChannelRecall a registered memory channel by following the steps below.1 Press the key to enter Memory mode.The memory channel most recently used appears on the LCD.2 Rotate the DIAL to select the desired memory channel.Remark Touching [F MW] and rotating the DIAL allows skipping memory channels quickly in stepsof 10 memory channels.3 Press .Memory mode will be exited, and the frequency selected in VFO mode will bedisplayed.Tips• Unregistered memory channels are skipped.• By default, memory channel number 1 is used as a dual receive priority memory channel, “P”appears on the upper right corner of the priority memory channel number ( see page 96).• The data registered to a memory channel can be transferred to the VFO operating band by followingthe procedure below.Touch [F MW] for over one second. → Touch → Touch [V.WRITE]. → “OVERWRITE?”appears. → Select [OK], then touch [OK] to confirm.• The transceiver may be placed into a Memory Channel Only mode, (which restricts the FT2DR/DEoperation to memory channels only), by pressing , while pressing to turn the transceiveron.To cancel the Memory Channel Only mode, press , while pressing again.Recalling the Home Channels1 Touch [F MW].The function menu appears on the LCD.
