137Customize Menu Settings for Individual Use (Set Mode)Set Mode: MEMORY Menu OperationsProhibiting Registration to a Memory ChannelMemory Channel Protect FunctionA memory channel may be protected so that a new frequency or memory channel tagname cannot be registered to it.1 Touch [4 MEMORY PROTECT].2 Rotate the DIAL to select the desired setting.OFF Allows registering to registering to memory channels.ON Prohibits registering to memory channels.Remark The default setting: OFFSetting Memory Skip FunctionBy selecting [5 MEMORY SKIP], you can set the scan method for scanning memorychannels.For details, see “Specifying Skip/Selected Memory Channels” on page 77.Setting the Memory Channels Used for RegistrationSet whether to register to the lowest unused memory channel number following the channelnumber you most recently used, or to the lowest unused memory channel number.1 Touch [6 MEMORY WRITE].2 Rotate the DIAL to select the desired setting.NEXT Registers to the smallest unused memory channel number whichcomes after the channel number you used most recently.LOWER Registers to the unused memory channel having the lowest memorynumber.Remark The default setting: NEXT
