151Customize Menu Settings for Individual Use (Set Mode)Set Mode: CONFIG Menu OperationsSetting the frequency offset for Repeater ShiftRPT SHIFT FREQ FunctionSet the repeater shift offset frequency.1 Rotate the DIAL, then touch [16 RPT SHIFT FREQ].2 Rotate the DIAL to select the desired shift offset.The offset frequency can be set in steps of 0.05 MHz between 0.000 MHz and 150.000MHz.Remark The default setting differs depending frequencyDisabling Receiver While No Signal Is ReceivedReceiver Battery Save FunctionSets the Receive OFF Battery save interval (sleep ratio) to reduce power consumption.1 Rotate the DIAL, then touch [17 SAVE RX].2 Rotate the DIAL to select the desired setting (the time interval for disabling the receiveroperation).0.2 sec (1:1) to 1.0 sec (1:5) In steps of 0.1 secondto 1.0 sec (1:5) to 10 sec (1:50) In steps of 0.5 secondto 1.0 sec (1:50) to 60 sec (1:300 sec) In steps of 5 secondOFFSelecting OFF disables this function.Remark The default setting: 0.2 sec (1:1)Changing the Frequency Step ManuallyRotate the DIAL to select [18 STEP] to set each frequency step, when the Dial Knob isturned manually.For details, see “Setting the Frequency Step” on page 47.Setting Clock TimeRotate the DIAL to select [19 DATE & TIME ADJ] to set the built-in clock time.For details, see “Setting Clock Time” on page 43.
