150Customize Menu Settings for Individual Use (Set Mode)Set Mode: CONFIG Menu OperationsWhen the valid password is entered, the frequency display screen appears.Remark If an invalid password is entered, the transceiver is turned off automatically.CautionIf you have forgotten the registered password, carrying out all resetting allows you to turn on thetransceiver without entering the password.It should be noted that performing all resetting resets (initializes) all information such as the informationregistered to memory channels and various setting values.It is recommended that the password be written down on paper.Setting the PTT Delay Time PTT DELAY FunctionSet a timed delay before actual transmission begins after is pressed.1 Rotate the DIAL, then touch [13 PTT DELAY].2 Rotate the DIAL to select the desired setting.OFF/20ms/50ms/100ms/200msSelecting OFF disables the PTT delay time function.Remark The default setting: OFFSetting the ARS FunctionRPT ARS FunctionEnable or disable the automatic Repeater Shift operation ARS (Repeater operation isinitiated by tuning to the repeater frequency).1 Rotate the DIAL, then touch [14 RPT ARS].2 Rotate the DIAL to select the desired setting.ON Enables the ARS function.OFF Disables the ARS function.Remark The default setting: ONSetting the Repeater Shift DirectionRPT SHIFT FunctionSet the TX frequency shift direction for repeater use.1 Rotate the DIAL, then touch [15 RPT SHIFT].2 Rotate the DIAL to select the desired setting.SIMPLEX No TX frequency offset.-RPT Shifts TX to a lower frequency.+RPT Shifts TX to a higher frequency.Remark The default setting differs depending frequency
