63Using the MemoryUsing Memory BankTips• To register the preset receiver memory channels in the memory bank, see “Registering PresetReceiver Memory Channels into Memory Banks” on page 66.• Rotating the DIAL selects the memory channels, skip search memory channels, and programmablememory channels on the LCD in the following sequence:1 ↔ 2 ↔ 3 ↔ ...L50 ↔ U50 ↔ BANK 1 ↔ BANK 2 ↔ ...BANK 24 ↔ 1 ↔ 2...Memory bank channels are displayed when the DIAL is turned counterclockwise from channel [1],or when the DIAL is rotated clockwise from channel [U50].• If the memory bank name was changed, the changed bank name appears.• appears for a memory bank in which no memory channel is registered, and appears for amemory bank in which at least one memory channel is registered.Recalling Memory Bank1 Press the key, to enter Memory mode.2 Touch [F MW].3 Touch [BANK].4 Press the key.5 Rotate the DIAL to select the desired memory bank.6 Press the key.The memory bank to be used is determined.7 Rotate the DIAL to select the desired memory channel in the memory bank.Remarks • To select other memory banks, repeat steps 4 to 6.• To return to the regular memory channel mode, touch [F MW] followed by [MR].Canceling Memory Channel Registration in Memory Bank1 To cancel the registration, recall the memory bank where the desired memorychannel is registered.Remark For details on operations, see “Recalling Memory Bank”.2 Rotate the DIAL to select the memory channel you want to cancel the registration.3 Touch [F MW] for over one second.4 Touch .5 Touch [M.DEL].The registration is canceled, and the display returns to the memory bank display. Ifno other memory channels are registered in the memory bank, the memory bankhaving the lowest number is displayed.