120Customize Menu Settings for Individual Use (Set Mode)Using Set Mode[When there is no deeper level of menu items]Go to step 7.[When there is deeper level of menu items]5 Press the key.6 Rotate the DIAL to select the desired item to set.7 Press .Exits from Set mode.CautionOn some setting screens, pressing does not exit from Set mode. In this case, press the keyseveral times to return to the frequency display screen.Resetting the All Set Mode SettingsAll the Set mode settings can be restored to the default settings by following the procedurebelow.1 Press and hold for over one second to turn off the transceiver.2 While pressing the and keys simultaneously, press for over one second.The transceiver turns ON. When you hear a beep sound, release the keys.3 After “SET MODE RESET?” appears, touch [OK].A beep sounds.Tips • To cancel resetting, touch [CANCEL].• To reset the following items, make sure to perform All Reset ( see page 51).[TX/RX]1-1 ANTENNA ATT1-2 HALF DEVIATION1-3 RX MODE2-1 SQL TYPE[MEMORY]2 BANK NAME3 MEMORY NAME5 MEMORY SKIP[SIGNALING]2 DCS CODE3 DCS INVERSION6 PAGER7 PR FREQUENCY9 SQL S-METER11 SQL TYPE12 TONE SQL FREQ[WIRES-X]1 RPT/WIRES FREQ2 SEARCH SETUP4 EDIT CATEGORY TAG[CONFIG]5 CLOCK TYPE12 PASSWORD15 RPT SHIFT16 RPT SHIFT FREQ18 STEP[APRS]7 APRS MSG TXT15 BEACON STATS TXT18 DIGI PATH19 GPS SETUP23 CALLSIGN (APRS)24 MY POSITION25 MY SYMBOL (4:User)[CALLSIGN]1 CALLSIGN (DIGITAL)
