142Customize Menu Settings for Individual Use (Set Mode)Set Mode: SCAN Menu OperationsPress and hold the key for over one second to display “SETUP MENU”, then touch[SCAN] to set the individual items.After completing the setup, press to exit from Set mode.Setting the Surveillance Interval Time for Priority ChannelsDW INTERVAL TIME FunctionWhen the dual receive function is active, the interval time at which the priority channel ismonitored can be set.1 Rotate the DIAL, then touch [1 DW TIME].2 Rotate the DIAL to select the monitoring interval from 0.1 SEC to 10 SEC.Remark The default setting: 5.0 secondsSetting the Illumination On/Off When Scanning StopsLAMP FunctionSet whether or not the LCD backlight is turned on when a signal is received duringscanning.1 Rotate the DIAL, then touch [2 SCAN LAMP].2 Rotate the DIAL to select the desired setting.ON The LCD backlight will illuminate when a signal is received.OFF The LCD backlight will not illuminate when a signal is received.Remark The default setting: ONSetting the Time to Resume ScanningSCAN RE-START FunctionSet the time interval to resuming scanning after a received signal ends during scanning.1 Rotate the DIAL, then touch [3 SCAN RE-START].2 Rotate the DIAL to select the time to resume scanning from 0.1 SEC to 10 SEC.Remark The default setting: 2.0 seconds