54Using the MemoryUsing the MemoryA Wide Variety of Memory FunctionsThe FT2DR/DE transceiver incorporates the following types of memory channels inaddition to the regular memory channels (numbers 001 to 900).• [Home channels] which can be recalled on each frequency band just by touching a key( see page 57)• Preset Receiver Memory Channels include the International VHF marine radio (57channels) and Worldwide Wide Broadcasts (89 channels) ( see page 65)• 99 (901 to 999) skip search memory channels that allow skipping unwanted frequenciesduring VFO scanning ( see page 72)• 50 sets of memory channels (L1/U1 to L50/U50) for programmable memory channelscanning (PMS) ( see page 81)The operating frequency and other operational information can be registered to eachregular memory channel, home channel, or PMS memory channel:• Operating frequency • Memory tag • Repeater information• Tone information • DCS information • Memory channel skip information• Transmitter output(The analog/digital operating mode is not registered to the memory channel)Memory channels can be sorted and registered into memory banks according to theintended use. The transceiver allows you to use 24 types of memory banks. A maximum of100 memory channels can be registered in each memory bank. A name can be assignedto each memory bank with up to 16 characters. ( see page 64)9008994321L50/U50L49/U49L4/U4L3/U3L2/U2L1/U1904903902901999998Memory Channel Configuration of the TransceiverMemory channels(900 channels)Home channels(11 channels)Memory banks(24 banks)Up to 100 memory channels can beregistered to each bank.Skip search memory channels(99 channels)PMS memory channels(50 sets)Preset receiver memory channels• Memory channels for short wave broadcasts(89 channels) and international VHF (marine)radios (57 channels)