143Customize Menu Settings for Individual Use (Set Mode)Set Mode: SCAN Menu OperationsSelecting a Receive Operation When Scanning StopsTouch [4 SCAN RESUME] to set the receive operation for when scanning stops.For details, see “Setting the Receive Operation When Scanning Stops” on page 74.Setting the Scanning RangeYou can set the frequency range for scanning in VFO mode and Memory mode.1 Touch [5 SCAN WIDTH].2 Rotate the DIAL to select [VFO], then press the key.3 Rotate the DIAL to select the desired setting referring to the table below.ALL Scans all bands from the current frequency within the 1.8 MHz to 999MHz range.BAND Starting with the current frequency, scans within the current band.4 Press the key.5 Rotate the DIAL to select [MEMORY], then press the key.6 Rotate the DIAL to select the desired setting referring to the table below.ALL CHScans all memory channels (1 to 900) starting with the currently specifiedmemory channel. When “Selected memory channel” is selected, allspecified memory channels are scanned ( see page 76).BANDScans only the memory channels to which the frequencies are registered,within the same frequency band *1 as the currently specified memorychannel.When the memory channels are registered as the specified memorychannels, scans only the specified memory channels to which thefrequencies are registered, within the same frequency band. *1*1: For the relationship between frequency bands and receive frequencies, see the table at thebottom of page 36.
