15Before Using the TransceiverNames and Functions of Controls DATA terminal*• To use the clone function, connect to anotherFT2DR/DE with an optional clone cable (CT-168).• When updating the firmware, connect to yourPC using a USB cable.* For instruction to update the firmware, accessour website.• Connect the optional camera-equippedmicrophone (MH-85A11U) to this terminal.• Connect an external GPS to this terminal. MIC/SP jack*Connect a speaker microphone or earpiecemicrophone to this jack.The waterproof protection cannot be attainedwhen an external microphone is connected.Do not connect any microphone which isnot specified by Yaesu. A failure can result. EXT DC IN jack*• When charging the battery pack, connect thebattery charger (PA-48 or SAD-14B) to this jack.• In the USA/EXP market, connect an externalpower supply adapter with a cigarette lighterplug (SDD-13) or an external power cable (E-DC-6) to this jack.Do not connect any battery charger whichis not specified by Yaesu. A failure canresult.*: When the included antenna and battery pack areinstalled and the MIC/SP jack, EXT DC IN jack, DATAterminal, and micro SD slot are securely covered withrubber caps, the FT2DR/DE meets the waterproofingperformance conforming to IPX5 (See page 13).Touch Screen Display①②③④⑦ ⑪ ⑫⑬⑤⑥④⑤⑥⑧⑭⑬⑭⑨ ⑩⑮⑩① This is the A-band display area.② This is the B-band display area.③ Displays touch keys.④ Displays mode.In VFO mode, “VFO” is displayed.In Memory mode, “MR” and the channelnumber are displayed.⑤ Display Bar indicates the volume level.⑥ Displays the transmit output icon, the Smeter and the PO meter levels.S meter: Displays the received signalstrength in 9 steps.PO meter: Displays the transmit power levelin 4 steps.H I: High power (5W)L 3: LOW 3 power (2.5W)L 2: LOW 2 power (1W)L 1: LOW 1 power (0.1W*1 )⑦ Displays the time.⑧ Displays the frequency shift direction duringrepeater operation ( see page 52).-: Minus shift+: Plus shift@: Split operation⑨ lights when the mute function is active( see page 44).⑩ Displays the frequency.⑪ Displays icon types.: Lights when Auto Power Off is active( see page 145).: Lights when DTMF function isenabled ( see page 103).: Lights when GPS is acquired ( seepage 86).: Lights when GPS Log Function isenabled ( see page 89).: Lights when a microSD memory cardis inserted ( see page 29).⑫ The battery condition is displayed in 8steps.: Full battery power: Battery is depleted. Charge battery.: (When blinking) Charge batteryimmediately.* 1 : European version (VHF: 0.05W)
