101Convenient FunctionsAF-DUAL Receive Function (Receiving Signals on Other Frequency Channels While Listening to Broadcast Radio)5 Press the key to select [AM] or [WFM].Pressing the key each time switches between the AM broadcast (middlewave band) and FM broadcast.On the LCD, AM (AM broadcast) or WFM (FMbroadcast) is displayed.6 Rotate the DIAL to tune to the frequency of the broadcast station.Tips• For broadcast station frequencies, refer to “Worldwide short wave broadcast” on page 69 or acommercially sold frequencies list.• The AF-DUAL receive function can also be used for a radio frequency registered to a memory bank.• Pressing during radio reception allows receiving the standby frequency.• While listening to the radio using the AF-DUAL function, in standby receive mode, the transceivercannot simultaneously receive broadcasts on the AM frequency (middle wave band) on either theband-A or band-B, and FM frequency.• To disable the AF-DUAL Function, touch [F MW] followed by [A.DUAL].The frequency (memory channel) in receive standby appears on the LCD.Setting the Resumption Time of Radio ReceptionWhile receiving a radio broadcast, the ham radio band (A-band or B-band) can bemonitored in standby receive mode. After losing the receive signal or completingtransmission, broadcast reception can be resumed.1 Press and hold the key for over one second.The transceiver enters Set mode.