112Communicating with a Specific Remote StationUsing the Tone Squelch FunctionSetting the DCS CodeThe DCS code can be selected from 104 types (from 023 to 754).1 Press and hold the key for over one second.The transceiver enters Set mode.2 Touch [SIGNALING].3 Touch [2 DCS CODE].4 Rotate the DIAL to select the desired DCS code.5 Gently press the key 3 times.The DCS code is set and the transceiver exits from Set mode.TipThe default setting is [023].Searching for the DCS Code Used by the Remote StationSearch and display the DCS code used by the remote station.1 Press and hold the key for over one second.The transceiver enters Set mode.2 Touch [SIGNALING].3 Touch [2 DCS CODE].
