ENGINE6-60 TNV IDI Service ManualCylinder BlockIMPORTANTBe sure to align the flats on the oil pumpwith the flats on the crankshaft gear.3. Reinstall the timing gear case cover.4. Reinstall and tighten the gear case cover bolts.5. Reinstall the crankshaft pulley.6. Reinstall the washer and bolt. Tighten to thespecified torque. See Special Torque Chart onpage 6-13 for specifications.Installation of Oil Pan1. Reinstall the oil pickup tube (Figure 6-100, (1))and a new O-ring (Figure 6-100, (2)).Figure 6-1002. Apply a continuous bead of ThreeBond LiquidGasket No. 1212, Yanmar Part No.977770-01212 to the mounting surface of the oilpan (Figure 6-101, (2)) and crankcaseextension (if equipped) (Figure 6-101, (1)). Besure to circle each bolt hole.3. If equipped, reinstall the crankcase extension(Figure 6-101, (1)). Reinstall the oil pan andtighten the bolts securely.Figure 6-101Final Assembly of Engine1. Reinstall the starter motor.2. Reinstall the cylinder head. See Reassembly ofCylinder Head on page 6-29.3. Reinstall the engine in the machine.4. Reconnect the fuel and coolant lines.5. Reinstall the alternator.6. Reconnect and adjust the throttle cable.7. Reconnect all electrical connections.8. Fill the engine with oil and coolant.9. Reconnect the battery cables, negative (-) cablelast.0002185(2)(1)0002184(2)(1)
