FUEL SYSTEMTNV IDI Service Manual 7-13Fuel Injection PumpFigure 7-88. Remove the fuel supply line (Figure 7-8, (2))from the fitting on the fuel injection pump.9. Plug or cap all openings to minimize leakageand prevent contamination.10. Remove the throttle cable from the fuel injectionpump.11. Separate the stop solenoid wiring connector(Figure 7-8, (3)).12. Remove the lube oil line (Figure 7-9, (1)) fromthe fuel injection pump and cylinder block.IMPORTANTTake care to not damage or bend the lubeoil line.Figure 7-913. Remove the fuel injection pump drive gearaccess cover (Figure 7-10, (1)) from the gearcase cover (Figure 7-10, (2)).Note: The cover is secured with an adhesivesealant. Use a gasket scraper toseparate the cover from the gear casecover.Figure 7-1014. To aid in reassembly, make reference marks(Figure 7-11, (1)) on the drive gear and idlergear.0002210(1)(3)(2)(1)0002239(2)(1) 0002211
